Nobody loves a scratch in a floor, especially one that is brand-new and shining with gold. But other tiles—like glazed porcelain tiles—are prone to or frequently become scratched. Glazed tiles have several benefits, such as a bright surface, moisture resistance, simplicity in cleaning, and low cost, but they also have some drawbacks, such as a surface that is easy to scratches.
Glazed tiles have a glossy surface, which makes scratches and stains more noticeable than wood-like tiles or unglazed porcelain tiles with scratch-resistant surfaces. Additionally, if necessary precautions are not followed, these tiles, which are frequently paved throughout the house, may occasionally be scratched.
Do not, however, worry. Every problem has a solution. As a tile supplier, George Ceramic will explain how to remove scratches from porcelain tiles as well as how to generally keep them from getting damaged in this blog.
Three Techniques to Remove Scratches from Glazed Porcelain Tiles Effectively:
According to the information previously provided, you should have a better understanding that ceramic and porcelain tile typically have glazed surfaces, making them more vulnerable to scratching and damage. But there are three quick and efficient ways to fix scratches on glazed porcelain tiles. Let’s look at it now.
The first method: To clean glazed tile scratches with soapy water.
The first method is best suited for stains that are not difficult to get rid of but cannot be removed with just water.
Step 1: Soak a soft and clean cloth in soapy water, then wipe around the scratch.
Step 2: Cleaning should be done throughout the full length of the scratch, with special care paid to the end where dust and grime tend to collect.
Step 3: After cleaning, wipe the scratches thoroughly with a soft and clean towel.
Step 4: When gathering the materials required for restoration, cover the scratches with a dry cloth after they have been cleaned and dried.
Step 5: Use baking soda to remove stains from the glazed tiles.
Method 2: Remove moderate scratches on glazed porcelain tiles with baking soda
This technique works well for moderate stains that are neither too difficult nor too simple.
Step 1: Add a few drops of water to the baking soda in the vessel to thin it to the consistency of a paste.
Step 2: Apply the paste to the contaminated area and remove any scratches or surfaces using a wet, non-abrasive scrub pad or soft brush.
Step 3: Rinse off baking soda and any metal debris to clean the tiles. Please use a damp foam eraser to wipe the surface if the stain remains visible after washing.
Step 4: When finished, wipe the tiles dry to get rid of any remaining moisture and let them air dry for at least 6 to 10 hours.
Let’s move on to the third method for cleaning stains off glazed tiles.
Method 3: To remove severe scratches from glazed porcelain tiles, use floor tile scratch remover.
Hard-to-remove stains or metal marks can be removed with this technique.
Step 1: Use vinegar or toothpaste as a scratch repair remedy, and then dab the solution around the damage with a clean towel.
Step 2: Make a small circular movement and pay close attention to the end of the scratch.
Step 3: Before performing these actions again, give the scratches time to dry. Scratches should be almost unnoticeable after this therapy.
Step 4: To seal the scratch, use a clean, soft cloth to apply a layer of auto wax to the tile’s surface. Give the auto wax time to completely dry.
These three methods are simple and effective methods to remove scratches on glazed porcelain tiles. By applying these methods, you will be able to remove stains on the floor effortlessly.
Our other article also introduces how to clean floor tiles.
As long as the method of removing scratches is mastered, the glazed porcelain tiles at home will not worry about being scratched and affecting the overall appearance. The above are three effective methods to remove the scratches from glazed porcelain tiles, hope it will be helpful to you. If you want to know more, please continue paying attention to us.